AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Fujikura FSM-17R SM MM Fiber Optic Fusion Splicer – AAATesters.com

On Sale! Fujikura FSM-17R SM MM Fiber Optic Fusion Splicer – AAATesters.com

Click for Product Info and Updated Pricing

Fujikura FSM17R SM & MM Clad Alignment Fiber Fusion Splicer with built in Heat Shrink Oven , Splice up to 4 fibers at one time

Fujikura FSM-17R Fusion Splicer

Fujikura FSM-17R FSM17R Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Fujikura FSM-17R Mass Fiber Fusion Splicer

Fujikura FSM-17R

Key Features:
– Compact and suitable for aerial splicing
– High wind shielding
– Fully automatic operation and user friendly
– AC/DC converter work as both AC/DC converter and battery charger
– High resolution 5 inch color monitor
– X & Y fiber observed simultaneously
– Automatic altitude compensation

FSM-17R

Specifications:
– Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
– Fiber Count: Single, 2, 4
– Fiber cleaved length: 10mm
– Actual average splice loss: 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
– Splicing time: Typical 20seconds
– Return loss: >>60dB
– Splicing modes: 40 user programmable modes and up to 60 modes for reference (factory predetermined setting).
– Splice loss estimate: Available
– Storage of splice result: The last 600 results to be stored in the internal memory.
– Fiber display: X / Y, or both X and Y simultaneously.
– Magnification: 89x
– Viewing method: Two CMOS cameras and 5.6inch color LCD monitor.
– Operating condition: 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50ô€‹† respectively.
– Mechanical proof test: 2N
– Tube heater: Built-in tube heater with 10 heating modes and up to 20 modes for reference.
– Tube heating time: Typical 40seconds with FP-04(T) protection sleeve.
– Applicable protection sleeve length: 60mm and 40mm
– No.of splice/heating with battery: Typical 70 cycles with BTR-06(S) / Typical 140 cycles with BTR-06(L).
– Power supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11. 13.2V DC with BTR-06(S)/(L).
– Terminals: USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC.
– Wind protection: Max. wind velocity of 15m/s.
– Dimensions: 150W x 150D x 150H (mm)
– Weight: 2.2kg (2.7kg including AC adapter ADC-11)

Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange

Included:
– Fujikura FSM-17R Fusion Splicer
– Fujikura CT-30 High Precision Fiber Cleaver
– (1) 250 micron Single Fiber Holder Set
– (1) 4 Fiber Ribbon Holder Set
– Fujikura HJS-02 Hot Jacket Stripper
– Fujikura HJS-02 Hot Jacket Stripper Power Cord
– (1) Spare Electrode Set
– Battery Pack
– AC Power Adapter / Battery Pack Charger
– AC Power Cord
– Fujikura FSM-17R Hard Copy User Manual
– Fujikura CT-30 Cleaver Carrying Case
– Carrying Strap
– (20) Fiber Splice Heat Shrink Protection Sleeves
– Fujikura Yellow Hard Carrying Case

Buy, Sell, New, Used, Fujikura FSM-17R

Fujikura FSM-17R Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List