AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Fujikura FSM-60S Fusion Splicer With Cleaver NEW

On Sale! Fujikura FSM-60S Fusion Splicer With Cleaver NEW

Click for Product Info and Updated Pricing

Fujikura AFL FSM-60S SM & MM Core Alignment Fusion Splicer

Fujikura FSM-60S Fusion Splicer

This Is A Brand New Open Box Unit, Never Before Used In The Field

This Unit Has A Total Splice Count Of 3 For Testing Purposes

The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds.

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
– 4oz Flip Jar Of 99% Alcohol
– (50) Non-Lint Dry Wipes
– (6) Fiber Optic Wipes w/ 99% Alcohol
– 2oz Pump Fast Evaporating Mirror Spray
– (25) Camera Swabs
– (25) V-Groove Swabs

Includes Fujikura CT-30 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

FSM 60 S 60S FSM60 FSM60S FSM-60

Fujikura FSM-60S FSM60S New Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

The FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30” drop test.

The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.

New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Fujikura FSM-60S

Features:
– Rugged construction providing shock, dust and moisture resistance
– Dual monitor position with automatic image orientation
– Automatic arc calibration and fiber identification
– User-selectable fiber clamping method – sheath clamp or fiber holders
– Auto-start tube heater feature
– Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
– Simultaneous battery charge and splicer operation
– Long life battery (up to 160 splice/heat cycles per charge)
– Detachable work table incorporated into the transit case
– Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
– Green friendly – RoHS & WEEE compliant

FSM-60S

Specifications:

 

Applicable Fibers  Single-mode (ITU-T G.652),  multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter  80µm to150µm
Coating Diameter  100µm to 1,000µm
Fiber Cleave Length  8 to 16mm with 250µm coating diameter, 16mm with 900µm coating diameter
Typical Average Splice Loss  0.02dB with Sm, 0.01dB with  mm, 0.04dB with DS, 0.04dB with NZDS
Measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time  Typical 9 seconds with standard single-mode fiber
Arc Calibration  method  Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing  modes  100 preset and user programmable modes
Splice Loss Estimate  Based upon dual camera core alignment data
Storage of Splice Result  Last 2000 results to be stored in the internal memory
Fiber Display  X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification  300X for single X or Y view, or 187X for X and Y view
Viewing  method  Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition  0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test  1.96 to 2.25N
Tube Heater  Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time  Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length  60mm, 40mm, micro
Splice/Heat Cycles with Battery  Typical 160 cycles with power save functions activated
Power Supply  Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals  USB 1.1 (USB-B type) for PC communication.  mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection  Maximum wind velocity of 15m/s. (34 mph)
Dimensions  136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight  2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with BTR-08 battery

Condition: BRAND NEW (Open Box) / Calibrated
Warranty: 90 Day Exchange

Included:
Fujikura FSM-60S Arc Fusion Splicer (BC# 21870)
-Total Arc Count: 3 (For Testing Purposes)
Fujikura CT-30 High Precision Fiber Cleaver w/ Case (BC# 16054M)
Clauss CFS-2 Fiber Optic Stripper
6 Month Fusion Splicer Care Kit FS6MC:
-4oz Flip Jar Of 99% Alcohol
-(50) Non-Lint Dry Wipes
-(6) Fiber Optic Wipes w/ 99% Alcohol
-2oz Pump Fast Evaporating Mirror Spray
-(25) Camera Swabs
-(25) V-Groove Swabs
Fujikura ADC-13 AC Adapter/Battery Charger
Fujikura BTR-08 Battery Pack
Battery Charger Cable
Cooling Tray
FSM-60S Quick Reference Guide
Spare Electrode Set
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Strap For Unit
Hard Carrying Case w/ Strap

Buy, Sell, New, Used, Fujikura FSM-60S


Fujikura FSM-60S Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List