On Sale! Fujikura FSM-60R12 SM MM Ribbon Fusion Splicer – AAATesters.com
Click for Product Info and Updated Pricing
Fujikura FSM-60R12 Fusion Splicer
SKU: 2i53
Fujikura FSM-60R12 Singlemode & Multimode Single Fiber & Ribbon Fiber Fusion Splicer
This Unit Has A Very Low Total Splice Count of Only 367!
Up To 12-fiber Ribbon Splicing.
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
– 4oz Flip Jar Of 99% Alcohol
– (50) Non-Lint Dry Wipes
– (6) Fiber Optic Wipes w/ 99% Alcohol
– 2oz Pump Fast Evaporating Mirror Spray
– (25) Camera Swabs
– (25) V-Groove Swabs
Includes Fujikura CT-30 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed
Fujikura FSM-60R12
FSM-60 FSM60R FSM 60R FSM 60R12 FSM60R12
Fujikura FSM-60R12 FSM60R12 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
FSM-60R Fusion Splicer FEATURES:
– Up to 12-fiber ribbon splicing.
– Cladding alignment with fixed v-grooves.
– Environmental resistant features.
– Arc calibration-free system.
– 4.1″ TFT color LCD monitor.
– Dual directional operation system.
– Long life battery.
FSM-60R12
SPECIFICATIONS:
Applicable type of fibers | SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655) |
Fiber count | Single, 2, 4, 5, 6, 8, 10 and 12 |
Applicable fiber dimensions | Ribbon : Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.4mm Single : Cladding diameter 125μm, Coating diameter 250μm and 900μm |
Fiber cleaved length | 10mm |
Splicing modes | Total 100 modes |
Typical splice loss | 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. (Measured by cut-back method relevant to ITU-T standard). |
Return loss | >>60dB |
Splicing time | Typical 20sec. with standard SM (ITU-T G.652) |
Splice loss estimate | Available |
Tube heater / heating time | Built-in tube heater with 30 heating modes. / Typical 40sec with Fujikura FP-04T and 50sec with FP-05. |
Applicable protection sleeve | 60mm, 40mm and Fujikura FPS01 series |
Storage of splice result | The last 2000 results to be stored in the internal memory. |
Tension test | 1.96 to 2.25N |
Operating condition | 0 to 3660m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively. |
Storage condition | 0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term. |
Dimensions | 136W×161D×143H[mm] excluding rubber foot. |
Weight | 2.1kg with AC adaptor ADC-13, 2.5kg with battery BTR-08. |
Viewing method and display | Two CMOS cameras and 4.1″ color LCD monitor. |
Fiber view and magnification | X / Y (35X magnification), or both X and Y simultaneously (35X magnification). Changeable 35X to 90X. |
No.of splice cycles with battery | Typical 90 cycles (splice / tube heat) with BTR-08. |
Power supply | Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08. |
Electrode life | 1000 arc-discharges |
Terminals | USB 1.1 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply. |
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Included:
Fujikura FSM-60R12 Single & Ribbon Fiber Fusion Splicer (BC# 23786)
-Total Arc Count: 367
Fujikura CT-30 High Precision Fiber Cleaver w/ Case (BC# 16326M)
Clauss CFS-2 Fiber Stripper
6 Month Fusion Splicer Care Kit FS6MC:
-4oz Flip Jar Of 99% Alcohol
-(50) Non-Lint Dry Wipes
-(6) Fiber Optic Wipes w/ 99% Alcohol
-2oz Pump Fast Evaporating Mirror Spray
-(25) Camera Swabs
-(25) V-Groove Swabs
Fujikura HJS-02 Hot Jacket Stripper w/ DC Cord
Fujikura ADC-13 AC Adapter/Battery Charger
Fujikura BTR-08 Battery Pack
DCC-14 Battery Charger Cable
FH-50-12 Fiber Holder Set
FH-50-2 Fiber Holder Set
FH-50-6 Fiber Holder Set
FH-50-250 Fiber Holder Set
FSM-60R Quick Reference Guide
Spare Electrode Set
Cooling Tray
Magnifying Glass
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Strap For Unit
Hard Carrying Case