AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Fujikura FSM-50S SM MM Fusion Splicer With Cleaver

On Sale! Fujikura FSM-50S SM MM Fusion Splicer With Cleaver

Click for Product Info and Updated Pricing

Fujikura AFL FSM-50S Singlemode & Multimode Core Alignment Fusion Splicer

Fully automatic core alignment with 9 second splice time for SM fiber!

Fujikura FSM-50S Fusion Splicer

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
– 4oz Flip Jar Of 99% Alcohol
– (50) Non-Lint Dry Wipes
– (6) Fiber Optic Wipes w/ 99% Alcohol
– 2oz Pump Fast Evaporating Mirror Spray
– (25) Camera Swabs
– (25) V-Groove Swabs

Includes Fitel S323 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

FSM-50 FSM50s FSM 50S 50

Fujikura FSM-50S FSM50S Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Fujikura FSM-50S

This is a new standard of core to core aligning arc fusion splicer.

A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world’s fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.
Features

– Fully automatic core alignment with 9 second splice time for SM fiber
– Reduced splice protector shrink time – now only 35 seconds
– Extremely compact and lightweight – just 2.8kg
– Automatic fibre type identification
– Multi-position monitor for front or top mounting
– High capacity battery option for 120 splice/shrink cycles
– Real time arc calibration
– Fibre clamps integrated into wind protector to reduce operation time

Dual-directional operating system

The reversible monitor accommodates the user’s ergonomic preference. With a control panel on each side, the ease of use is phenomenal.
Splice time of 9 sec.

Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.
Tube-heat time of 35 sec.

Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.
Large capacity battery option

FSM-50S

Applicable fibers SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)
Fiber Count Single
Cladding diameter 80 to 150µm
Coating diameter 100 to 1000µm
Fiber cleaved length 8 to 16mm with coating diameter of 250µm or less. 16mm with coating diameter of 250 to 1000µm. Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000µm is available.
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time Typical 9sec. with standard SM fiber.
Return loss >>60dB
Splicing modes 40 user programmable modes and up to 60 modes for reference(factory predetermined setting).
Splice loss estimate Available
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB(0.1dB step) can be made for an in-line fixed attenuator.
Storage of splice result The last 2000 results to be stored in the internal memory.
Fiber display X / Y, or both X and Y simultaneously.
Magnification 295x for single X or Y view, or 147x for X and Y view.
Viewing method Two CMOS cameras and 5.6 inch color LCD monitor.
Operating condition 0 to 5000m above sea level, 0 to 95%RH and -10 to 50? respectively.
Mechanical proof test 2N(standard)/ 4.4N(option)
Tube heater Built – in tube heater with 10 heating modes and up to 20 modes for reference.
Tube heat time Typical 35sec. with FP-03 protection sleeve.
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves.
No.of splice/heating with battery Typical 80 cycles with BTR-06(S)/ Typical 160 cycles with BTR-06(L).
Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06(S / L).
Terminals USB 1.1(USB-B type)for PC communication. Video terminal RCA video jack / NTSC.
Wind protection Max. wind velocity of 15m/s.
Dimensions 150W × 150D × 150H(mm)
Weight 2.3kg(2.8kg including AC adapter ADC-11)

Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange

Included:
Fujikura FSM-50S Arc Fusion Splicer (BC# 21009)
Fitel S323 High Precision Fiber Cleaver (BC# 21010)
Clauss CFS-2 Fiber Optic Stripper
6 Month Fusion Splicer Care Kit FS6MC:
-4oz Flip Jar Of 99% Alcohol
-(50) Non-Lint Dry Wipes
-(6) Fiber Optic Wipes w/ 99% Alcohol
-2oz Pump Fast Evaporating Mirror Spray
-(25) Camera Swabs
-(25) V-Groove Swabs
Fujikura ADC-11 AC Adapter
Fujikura BTR-06 Battery Pack
DCC-10 Charge Cable
Power Cord
Hard Copy User Manual
Hard Carrying Case

Buy, Sell, New, Used, Fujikura FSM-50S


Fujikura FSM-50S Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List