AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Fujikura 70S SM MM Fiber Fusion Splicer

On Sale! Fujikura 70S SM MM Fiber Fusion Splicer

Click for Product Info and Updated Pricing

Fujikura 70S SM MM Fiber Fusion Splicer

Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency

Fujikura 70S Fusion Splicer

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
– 4oz Flip Jar Of 99% Alcohol
– (50) Non-Lint Dry Wipes
– (6) Fiber Optic Wipes w/ 99% Alcohol
– 2oz Pump Fast Evaporating Mirror Spray
– (25) Camera Swabs
– (25) V-Groove Swabs

Includes Fujikura CT-30 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

FSM 70

Fujikura 70S Fujikura70S Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Fujikura 70S Fiber Fusion Splicer
The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

70S

Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and “severe-impact resistant” monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Features:
– Automated and programmable wind protector
– 14-second automated tube heater
– Fully ruggedized for shock, dust and moisture
– Li-ion battery with 200 splices/shrinks per charge
– 5 mm cleave length for splice on connector or small package needs
– Sheath clamp or fiber holder operation
– On-board training and support videos
– Internet software upgrades
– Multi-function transit case with integrated workstation

Fujikura 70S

Specifications:

 

Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter 80 – 150 μm
Coating Diameter 100 μm to 1,000 μm
Fiber Cleave Length 5 to 16 mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards
Splicing Time SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fibe
Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core axis alignment data
Storage of Splice Result Last 2,000 results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 320X for single X or Y view, or 200X for X and Y view
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length 60 mm, 40 mm, micro
Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated
Electrode Life 3,000 Arc Discharges
Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
Wind Protection Maximum wind velocity of 15 m/s. (34 mph)
Dimensions 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)
Weight 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange

Included:
Fujikura 70S Fiber Fusion Splicer
Fujikura CT-30 High Precision Fiber Cleaver
Clauss CFS-2 Fiber Stripper
6 Month Fusion Splicer Care Kit FS6MC:
-4oz Flip Jar Of 99% Alcohol
-(50) Non-Lint Dry Wipes
-(6) Fiber Optic Wipes w/ 99% Alcohol
-2oz Pump Fast Evaporating Mirror Spray
-(25) Camera Swabs
-(25) V-Groove Swabs
Fujikura ADC-18 AC Adapter/Battery Charger
Fujikura BTR-09 Battery pack
DCC-18 Charger Cable
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Hard Carrying Case w/ Strap

Buy, Sell, New, Used, Fujikura 70S


Fujikura 70S Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List